Config Reference

dinghy.cfg

[mcu dinghy]
#serial: 
#canbus_uuid: 

[temperature_sensor f0]
sensor_type: BME280
#i2c_address:
#   Default is 118 (0x76). The BMP180, BMP388 and some BME280 sensors
#   have an address of 119 (0x77).
i2c_mcu: dinghy
i2c_bus: spi1

[temperature_sensor f1]
sensor_type: BME280
i2c_software_scl_pin: dinghy:PB2
i2c_software_sda_pin: dinghy:PB3

[temperature_sensor th0]
sensor_type: Generic 3950
pullup_resistor: 2200
sensor_pin: dinghy:PA0

[temperature_sensor th1]
sensor_type: Generic 3950
pullup_resistor: 2200
sensor_pin: dinghy:PA1

[temperature_sensor th2]
sensor_type: Generic 3950
pullup_resistor: 2200
sensor_pin: dinghy:PA2

[temperature_sensor th3]
sensor_type: Generic 3950
pullup_resistor: 2200
sensor_pin: dinghy:PA3

[temperature_sensor th4]
sensor_type: PT1000
pullup_resistor: 2200
sensor_pin: dinghy:PB0

[temperature_sensor th5]
sensor_type: ATC Semitec 104NT-4-R025H42G
pullup_resistor: 2200
sensor_pin: dinghy:PA5

[temperature_sensor th6]
sensor_type: Generic 3950
pullup_resistor: 2200
sensor_pin: dinghy:PA6

[temperature_sensor th7]
sensor_type: Generic 3950
pullup_resistor: 2200
sensor_pin: dinghy:PA7

[temperature_sensor th8]
sensor_type: Generic 3950
pullup_resistor: 2200
sensor_pin: dinghy:PB1


[neopixel rgb0]
pin: dinghy:PB10
color_order: GRB, GRB, GRB, GRB, GRB, GRB, GRB, GRB, GRBW
chain_count: 9
initial_red: 0.1
initial_green: 0
initial_blue: 0
initial_white: 0.1

[neopixel rgb1]
pin: dinghy:PB11
color_order: GRB, GRB, GRB, GRB, GRB, GRB, GRB, GRB, GRBW
chain_count: 9
initial_red: 0.1
initial_green: 0
initial_blue: 0
initial_white: 0.1

[neopixel rgb2]
pin: dinghy:PB12
color_order: GRB, GRB, GRB, GRB, GRB, GRB, GRB, GRB, GRBW
chain_count: 9
initial_red: 0.1
initial_green: 0
initial_blue: 0
initial_white: 0.1

[neopixel rgb3]
pin: dinghy:PB13
color_order: GRB, GRB, GRB, GRB, GRB, GRB, GRB, GRB, GRBW
chain_count: 9
initial_red: 0.1
initial_green: 0
initial_blue: 0
initial_white: 0.1

[fan_generic fan0]
pin: dinghy:PA8
tachometer_pin: dinghy:PC13

[fan_generic fan1]
pin: dinghy:PB4
tachometer_pin: dinghy:PC14

[fan_generic fan2]
pin: dinghy:PA4
tachometer_pin: dinghy:PC15
tachometer_ppr: 2
tachometer_poll_interval: 0.001
cycle_time: 0.00004
hardware_pwm: true


[fan_generic fan3]
pin: dinghy:PB14
tachometer_pin: dinghy:PB15